Black Friday fishing deals, checked against 21,000+ prices. Free alert, no affiliate links.Black Friday deals checked for fakesBlack Friday fishing deals: which ones are realYou're signed up. Next deals email: Mon, Nov 23.

Tell a buddyBlack Friday is Friday, November 27Fri, Nov 27Get the alertSee the checked list

Gear·Gear guide

Best Fishing Pliers: The Right Pair for Your Fishing, $10 to $400

The best fishing pliers by job: a 7 in pair with carbide cutters for braid, aluminum for saltwater, 11 in for pike. Seven picks, $9.99 to $399.95.

··9 min read

An angler reaches into the open mouth of a fish held on a red lip gripper with a pair of worn, black-handled pliers
Photo: wonderisland / Depositphotos

Fishing pliers are the tool that takes the hook out, cuts the line and opens a split ring. For most fishing in fresh water, buy a 7 in (18 cm) pair with tungsten carbide side cutters, a spring and a lanyard. Expect to pay $16 to $25. I’d start with the KastKing Cutthroat at $23.99. For pike, buy a long pair too.

One maker, Danco Sports, sells a $9.99 split ring plier and an $847.99 titanium one. Five of the seven picks below cost $30 or less.

Which fishing pliers for which fishing?

Match the pliers to the fish and the water. The hardest jobs set the spec: braid needs a hard cutter, salt needs a metal that won’t rust, and teeth need distance.

Your fishing What to get Pick Price
Bass, panfish, trout on mono 6 1/2 in (17 cm) carbon steel, spring, crimper Rapala Fisherman’s from $16.49
Anything on braid 7 in (18 cm), tungsten carbide cutters KastKing Cutthroat 7” $23.99
Saltwater, inshore 7 in (18 cm) aluminum, replaceable cutters Piscifun III $24.99
Pike, muskie, big catfish 11 in (28 cm) long nose Rapala Fisherman’s 11” $29.99
Changing hooks on lures split ring tip Danco 5.5” Split Ring $9.99

Prices from each maker’s page on Nov. 8, 2026.

Bass and panfish on mono or fluorocarbon. You need a jaw that grips a treble hook, a crimper for split shot and a light cutter. Rapala’s Fisherman’s Pliers do those three things from $16.49. Rapala calls the cutter “light duty”, and braid isn’t on its list.

Anything on braid. Braid frays under an ordinary cutter. KastKing says the tungsten carbide cutters on the Cutthroat “slice [through] mono, fluorocarbon, or braid.” Spool holds braided line? That cutter is worth the $7.50 more.

Saltwater. Pick aluminum or titanium. Sport Fishing’s Ric Burnley puts it plainly: “even stainless steel will corrode in salt water.” The Piscifun III is anodized aluminum with replaceable carbide cutters for $24.99.

Pike, muskie and big catfish. Get your hand away from the teeth. Minnesota DNR’s pike advice is short: “Remove hooks quickly with long-nosed pliers, not your fingers. If a hook is deeply set, cut the line and leave the hook in place.” For muskie it adds a “small bolt cutter”. The northern pike teeth page shows why.

What matters when you buy fishing pliers?

Four things decide it: the cutter, the metal, the nose and the length.

Does the cutter go through braid?

The cutter decides if your pliers cut braid, and it’s where pliers give out. Rust and a worn cutter blade are the usual complaint, KastKing’s own blog says. Look for tungsten carbide, and for a replaceable cutter. Piscifun, Danco and Van Staal all sell pliers with cutters you can swap. A cheap carbon steel cutter is fine on mono. Outdoor Life lists “Line cutter doesn’t work on braid” as the one weakness of its rigging pick, the Shimano Power Pliers.

Which material is best, and what about saltwater?

The metal sets the price and decides how the pliers handle salt:

  1. Carbon steel, nickel plated ($16 to $30): Rapala’s Fisherman’s line. The cheapest way in, and fine in fresh water if you keep them dry.
  2. Stainless steel ($24 to $35): KastKing’s Cutthroat and Speed Demon Pro, Rapala’s Super Stainless from $28.99. KastKing claims the 420 stainless in its Speed Demon Pro is “46% harder than aluminum pliers.”
  3. Aluminum ($10 to $85): Piscifun, Danco. Danco anodizes its aluminum against corrosion and calls it “light enough to wear all day.” The jaws are steel or titanium.
  4. Titanium ($180 to $848): Van Staal, Danco Premio. Burnley’s summary: “Titanium and aluminum offer lightweight rigidity and durability, while steel is a heavier but more cost-conscious option.”

A bar chart of fishing pliers prices from the makers on Nov. 8, 2026: Danco 5.5 in split ring $9.99, Rapala Fisherman’s from $16.49, KastKing Cutthroat 7 in $23.99, Piscifun III $24.99, Rapala Fisherman’s 11 in $29.99, Danco Pro Series 6.5 in $84.99 and Van Staal 6 in titanium $399.95

Chart: fishing.info, from the makers’ pages.

Needle nose or split ring tip?

Needle-nose pliers reach into a mouth to unhook a fish. A split ring tip is a little hooked point that pries a split ring open, so you can swap a hook on a crankbait. Three of the picks here have one. To pinch a barb flat, a flat nose works better than a pointed one, the barbless hooks page explains.

What length of fishing pliers?

The everyday picks here run 5.5 to 7.09 in (14 to 18 cm). That size rides on a belt and works on a bass or a bluegill. Pike and big catfish want the 11 in pair. Flying? The TSA bans tools “longer than 7 inches (measured from end to end when assembled)” from carry-on bags. A pair marked 7 in sits right at the limit, and the TSA officer has the last word. The Piscifun, at 7.09 in, is over it. The 8 1/2 in Rapala and the 11 in pair go in your checked bag.

The comparison

All seven picks, read from the maker’s own page on Nov. 8, 2026. None of these numbers are ours.

Pliers Length Build Cutter Price
Danco 5.5” Aluminum Split Ring 5.5 in (14 cm) aluminum, split ring tip center cutters, mono, braid and fluorocarbon $9.99
Rapala Fisherman’s 6 1/2 or 8 1/2 in (17 or 22 cm) nickel-plated carbon steel “light duty” side cutter from $16.49
KastKing Cutthroat 7” 7 in (18 cm) 420 stainless, Teflon coat tungsten carbide, cuts braid $23.99
Piscifun III Aluminum 7.09 in (18 cm), 5.84 oz (166 g) anodized aluminum, titanium-coated steel jaws replaceable tungsten carbide $24.99
Rapala Fisherman’s 11” 11 in (28 cm) nickel-plated carbon steel extended-reach side cutter $29.99
Danco 6.5” Pro Series 6.5 in (17 cm) 6061 aluminum, titanium jaw inserts replaceable titanium-cobalt $84.99
Van Staal 6 or 7 in (15 or 18 cm) titanium replaceable tungsten $399.95 / $449.95

The picks in detail

KastKing Cutthroat 7” is the one pair for most anglers. It has carbide cutters for braid, crimping slots for split shot and leader sleeves, and holes in the jaw to cinch a knot tight. A sheath and a coiled lanyard come with it. Owner reviews average 4.7 over 29, with 24 five-star and one one-star.

Rapala Fisherman’s Pliers suit you if you fish mono for bass, panfish and trout and want to spend the least. They come in 6 1/2 in and 8 1/2 in. The lure tuning tool is for a crankbait that doesn’t swim straight. Skip them if you fish braid.

Piscifun III Aluminum is the cheap way into aluminum for the salt. It weighs 5.84 oz (166 g). Piscifun’s own page admits it isn’t the best set out there, then asks “do you really need the best set out there?” Five owner reviews, all five stars, is not many yet.

Rapala Fisherman’s 11” is the second pair for the boat or the bank when pike, muskie or catfish are biting. Rapala lists no spring or crimper on it. Outdoor Life names “Not many extra features” as its weakness and “Long build allows for safety with toothy or deep-hooked fish” as its strength. For a catfish that swallowed the hook, it reaches where your fingers shouldn’t.

Danco 5.5” Aluminum Split Ring is $9.99 split ring pliers for changing trebles. Booms Fishing’s F03 lists its split ring tip for sizes #4 to #6. Danco does not print a size range. If you change hooks on big saltwater plugs, Outdoor Life’s split ring pick is a dedicated pair from Texas Tackle.

Danco 6.5” Pro Series is the step up, at $84.99. You get titanium jaw inserts, cutters you can replace, a leather sheath and a lifetime warranty.

Van Staal titanium is for the angler who fishes salt every week and wants pliers that won’t rust. At $399.95 it’s a gift, not a first pair. More ideas at every price are on the gifts for fishermen page.

Six of the seven cost under $90. What the jump to titanium buys is light weight and, in Outdoor Life’s words for the Van Staal, pliers that “won’t rust in even the worst saltwater conditions.”

A labeled drawing of a pair of fishing pliers: needle nose with a split ring tip, serrated jaws, crimping slots, side cutters, pivot and spring, rubber handles and a coiled lanyard

What each part of fishing pliers does, from the needle nose to the lanyard. Drawing: fishing.info.

How do you use fishing pliers?

Five jobs cover almost every trip. Do them the same way each time and your hands stay away from the hooks.

  1. Take a hook out. Grip the hook with the jaws, not your fingers, and back it out. Hook deep in the throat? Cut the line and leave the hook, as Minnesota DNR advises for pike.
  2. Cut line. Put the line deep in the side cutter, close to the knot, and squeeze. KastKing builds a raised edge behind its cutter blade so the line stays in the cutting zone.
  3. Crimp split shot. Set the shot in a crimping slot, not between the tips, and squeeze just enough to hold. The same slots close a leader sleeve on heavy mono or wire. Our fishing weights page has the shot sizes.
  4. Open a split ring. Slide the hooked tip between the two coils and pry them apart. Then turn the new hook around the ring until it slips on.
  5. Cinch a knot. KastKing puts holes in the Cutthroat’s jaws for this: put the hook through a hole and pull to seat the knot.

What are the holes on fishing pliers for? On most pairs they are the crimping slots for split shot and sleeves. On the KastKing pliers, the round holes in the jaw are also for cinching knots.

Pliers or forceps?

Pliers do the most jobs. Forceps, the locking clamps fly anglers carry to unhook fish (also called hemostats), are small and light. Outdoor Life warns the Cuda forceps it picked “May not be stout enough for deeply-hooked extra-large fish.” A trout angler can get by with forceps. A bass or pike angler wants pliers.

Tool Best for Weak spot
Pliers bass, pike, catfish, saltwater: hooks, line, split shot, split rings more tool than a trout stream needs
Forceps (hemostats) trout and panfish, small hooks and flies “May not be stout enough” for deep hooks in big fish (Outdoor Life)
Long-nose pliers, 11 in pike, muskie, a swallowed hook “Not many extra features” (Outdoor Life)

How do you keep fishing pliers from rusting?

Rinse them in fresh water after every saltwater trip and let them air dry all the way, KastKing says. Then oil them. Outdoor Life’s Scott Einsmann once put his braid scissors away after salt without a rinse and forgot them all winter. His fix: “a few squirts of WD-40 and a rag.”

Clip the lanyard to your belt or your boat. Pliers that drop off a dock are gone. Keep them on your hip or in the same pocket of your tackle box every trip. Then you never hunt for them with a fish in the fishing net. The rest of the small gear worth carrying is on the fishing accessories page.

How we chose

We read the length, build, cutter and price of each pair from the maker’s own page on Nov. 8, 2026. Owner ratings are quoted from those pages with the review count. Where a page shows none, we say so. Opinions on how a pair handles are credited to the Outdoor Life or Sport Fishing writer who made them.

We did not test these pliers by hand. The picks follow the job: a carbide cutter for braid, a metal that suits salt, and a long nose for teeth. That last one is Minnesota DNR’s advice for pike.

Sources (18)

  1. KastKing, Cutthroat 7" Stainless Steel Pliers (specifications, price and owner reviews)
  2. Rapala, Fisherman's Pliers
  3. Rapala, Super Stainless Steel Pliers
  4. Rapala, Fisherman's 11" Pliers
  5. KastKing, Speed Demon Pro Fishing Pliers
Show all 18 sourcesShow fewer sources
  1. Piscifun, Piscifun III Aluminum Fishing Pliers (specifications, price and owner reviews)
  2. Danco Sports, 5.5" Aluminum Split Ring Plier
  3. Danco Sports, 6.5" Pro Series Aluminum Plier
  4. Danco Sports, Aluminum Fishing Pliers
  5. Danco Sports, Titanium Fishing Pliers (Premio range and prices)
  6. Van Staal, Pliers
  7. Booms Fishing, F03 Needle Nose Fishing Pliers
  8. Ric Burnley, Best Fishing Pliers for 2026, Sport Fishing
  9. Pete Robbins, Best Fishing Pliers, Outdoor Life
  10. Shane Coovert, Do Kastking Fishing Pliers Hold Up In Saltwater?, KastKing
  11. Minnesota DNR, MinnAqua Species Profile: Northern Pike
  12. Minnesota DNR, How to catch a muskellunge
  13. TSA, What Can I Bring? Wrenches/Pliers