
G. Loomis rods run from $265 for a GCX Lite trout rod to $840 for a Conquest bass rod. Those are G. Loomis’s own list prices on Nov. 11, 2026. The fly rods go up to $1,750. For most anglers the one to buy is a GCX at $275, or the IMX-PRO Bass at $450 if you want the middle rung. Every step up buys better guides, cork and graphite, but not a different rod. The 7 ft 1 in medium-heavy jig rod has the same ratings at $275 and at $685. The picks come from G. Loomis’s own charts and two magazine tests. No rod was fished for this page.
The G. Loomis 853C JWR is the same rod on paper at $275, $450, $580 and $685. Every one is 7 ft 1 in, medium-heavy and extra fast.
Which G. Loomis for your fishing?
| Fishing | Sensible rung | The step up |
|---|---|---|
| Bass, one all-round rod | GCX Mag Bass or Jig & Worm | IMX-PRO Bass |
| Bass, finesse on spinning | GCX Jig & Worm spinning | IMX-PRO Bass Jig & Worm spinning |
| Walleye | E6X Walleye | GLX Walleye |
| Trout, panfish, ultralight | GCX Lite | Trout Series ($475–555) |
| Steelhead and salmon | GCX Steelhead or Salmon | IMX-PRO Steelhead or Salmon |
| Inshore saltwater | GCX Inshore | IMX-PRO Blue or Green |
Pick the length and power for your fishing first, then the series. A 5 ft ultralight GCX Lite at $275 is a better trout stream rod than any 7 ft heavy Conquest. The rods hub explains power, action and length if those words are new.
G. Loomis’s current list starts at $265. For a first rod of any kind, a St. Croix, Fenwick or Shimano rod at $100–200 makes more sense. A G. Loomis is the rod you buy when you know which technique you fish most.
What does each G. Loomis series cost?
The bass ladder has five rungs, and each one starts $100 to $175 above the one below it:
| Bass series | List price, Nov. 2026 | Guides (853C or nearest) | Where the blank is made |
|---|---|---|---|
| GCX | $275–305 | SeaGuide aluminum oxide | Woodland, Washington |
| IMX-PRO Bass | $450–490 | Fuji Alconite | Woodland, Washington |
| GLX | $550–605 | Fuji SiC | Woodland, Washington |
| NRX+ | $655–685 | Fuji SiC + Recoil | Woodland, Washington (“American-made” blank) |
| Conquest | $815–840 | Fuji Torzite | not stated |
Prices are G. Loomis’s list prices in its store on Nov. 11, 2026. The plant is what each series page says. GCX is “designed and handcrafted” in Woodland, and IMX-PRO Bass and GLX are “designed and rolled entirely” there. The NRX+ pages call the blank “American-made” and the rod “handcrafted in Woodland, Washington”. The Conquest pages name Shimano’s Spiral-X build but no plant.
Outside bass, the same names come back for other fish. E6X is a walleye line at $275–315, and GLX Walleye runs $525–545. GCX Lite covers trout and panfish at $265–335. Salt has GCX Inshore at $310–360, IMX-PRO Blue and Green at $420–475 and NRX+ Inshore at $655–685. For salmon and steelhead, the GCX rods run $370–420, and the IMX-PRO Steelhead and Salmon lines $465–665. The fly rods start at $600 and end with the Asquith at $1,505–1,750.
The same rod at four prices: what does the money buy?
The 853C JWR is G. Loomis’s 7 ft 1 in medium-heavy jig-and-worm casting rod, and four series sell it with identical numbers on the chart. Same length, same extra-fast action (the rod bends mostly near the tip), same 12–16 lb line rating, same 3/16–5/8 oz lure rating. The price runs from $275 to $685.
So the extra money doesn’t buy a rod that throws heavier jigs. It buys four things you can read on the spec sheet:
- The guides. The GCX has SeaGuide aluminum-oxide rings. IMX-PRO moves to Fuji Alconite, GLX to Fuji SiC, NRX+ to SiC plus Recoil, and Conquest to Fuji Torzite with a SiC titanium tip.
- The blank. GCX uses what G. Loomis calls an “ultra-durable carbon blank”. The 2026 IMX-PRO Bass gets “a new high-modulus graphite”. GLX is high-modulus graphite rolled on stepped mandrels. NRX+ and Conquest use Spiral X, a way of rolling the blank that G. Loomis says fights twist. For Conquest it claims 15–20% less material and up to 20% less twist than traditional designs.
- The handle and seat. The IMX-PRO 853C has AA cork, the GLX AAA cork. IMX-PRO, GLX and NRX+ add the carbon-infused CI4+ reel seat. Conquest has a skeleton reel seat with a blank-through handle, which G. Loomis says adds sensitivity.
- The weight. Every step is sold as lighter and more sensitive. G. Loomis doesn’t print rod weights on these charts, so there’s no number to compare.
Conquest has no jig-and-worm model. Its closest rod, the 843C MBR, is a 7 ft 0 in medium-heavy fast rated 10–17 lb and 1/4–3/4 oz, at $815.
How do you read a G. Loomis model number?
The model number tells you the rod before you open the chart. G. Loomis doesn’t publish a key, but its current bass charts follow one pattern. The first two digits are the length in inches and the third is the power:
| Code | Length | Power | Example |
|---|---|---|---|
| 802 | 80 in (6 ft 8 in) | medium | NRX+ 802C JWR |
| 852 | 85 in (7 ft 1 in) | medium | IMX-PRO 852S JWR |
| 853 | 85 in (7 ft 1 in) | medium-heavy | GCX 853C JWR |
| 854 | 85 in (7 ft 1 in) | heavy | GLX 854C JWR |
| 894 | 89 in (7 ft 5 in) | heavy | NRX+ 894C JWR |
C means casting and S spinning. The letters after it are the technique: JWR for jig and worm, MBR for Mag Bass, the all-round fast rods. The power digit isn’t the same in every series, though. The E6X Walleye 841S is a light rod, and the GCX Lite 841S-2 a medium-light. Check the chart before you order by number alone.
NRX, E6X and IMX: where did the old names go?
You’ll still see the older names on used rods and sale pages, and the lineup has moved on. Shimano’s G. Loomis store lists NRX+ but no plain NRX. E6X shows up only as E6X Walleye, plus one sold-out E6X steelhead rod. The IMX-PRO Bass was redesigned for 2026 with the new blank and Fuji Alconite guides. The older IMX-PRO bass models still listed are all sold out, several at reduced prices. The non-PRO IMX Walleye rods at $355–370 were mostly sold out on Nov. 11 too.
That matters if you shop on price. A “G. Loomis IMX-PRO” at $250–270 on a sale page is probably the previous generation, not the 2026 rod at $450. Both carry the same warranty, but they are not the same blank.
Is the G. Loomis warranty really for life?
For defects, yes, and only for you. G. Loomis covers its rods with a “Limited Lifetime Warranty against non-conformities in workmanship and materials for the life of the original owner.” A rod used for commercial or rental fishing isn’t covered, and IMX-PRO Ice rods carry 5 years instead. You start a claim from a customer account on Shimano’s store.
A rod you broke yourself, say in a car door, is not a defect. That’s what Xpeditor is for, a no-fault replacement program for US and Canadian anglers. It sends you the same model “at 60% off the retail value of the rod”. G. Loomis’s own example: a rod that retails at $450 costs $180, plus tax and shipping. On a $685 NRX+ the same math comes to $274.
Register the rod within 30 days of purchase. G. Loomis says registration “unlocks access” to Xpeditor and its other warranty options, and Xpeditor is written for a “registered rod”. You need the serial number, two letters and five digits on the rod, and the model number from the tag.
How a claim works, from G. Loomis’s FAQ:
- Send the whole rod. G. Loomis wants the entire rod back for a warranty check. You may cut it once to ship it cheaper, and you tape the cut so the technician can tell it from the break.
- Pay your own shipping. It isn’t refunded, even if the claim fails.
- Expect a like-for-like rod. A discontinued model gets the closest current one, not an upgrade.
- Know what fails. If the break isn’t a defect, you pay a $25 inspection fee on top of a repair or a discounted replacement.
- Unsure? Use Xpeditor. G. Loomis itself suggests the no-questions-asked route when you don’t know if a rod will pass.
G. Loomis doesn’t repair graphite breaks or reel seats. It does repair guides in the US, with the whole rod sent in uncut. Questions go to 877-577-0600.
Compare that with the parent company and the brands next to it on the rack:
| Brand | Warranty on the rod | A rod you broke |
|---|---|---|
| G. Loomis | Lifetime, original owner, defects | Xpeditor: same model at 60% off retail |
| Shimano | 1 year from purchase, with the receipt | Express: half off list, select series |
| Fenwick | Lifetime, original owner, $20 fee | One courtesy replacement, $50 |
| St. Croix | 15 years (top series) or 5 years | Flat $60 inside the warranty period |
So a G. Loomis bought from Shimano’s store carries a lifetime, while a Shimano rod from the same store carries one year.
Who makes G. Loomis rods, and where?
Shimano does. Gary Loomis sold G. Loomis to Shimano in 1997, per TackleTour’s history of the company, and stayed on for a few years. The brand dates itself “since 1982” and today sells through Shimano North America’s store. In 2009 Shimano said it would stop selling bare G. Loomis blanks at the end of that year.
Edge rods are not G. Loomis rods. Edge is Gary Loomis’s later brand. In 2013, when TackleTour previewed its first bass rods, it called Edge a division of his blank company North Fork Composites.
Most of the rods are still built in Woodland, Washington. The GCX, IMX-PRO Bass, GLX, NRX+ and E6X Walleye pages all name Woodland as the place they are rolled or handcrafted. The top fly rod is the exception: the Asquith is “developed and hand-finished in Woodland” but rolled at Shimano’s Spiral X plant in Kumamoto, Japan.
Are G. Loomis rods worth the money?
Two magazine tests gave a G. Loomis a “best overall” pick. Wired2Fish named the IMX-PRO Bass Jig and Worm spinning rod its best overall spinning rod of 2026. Joe Albanese fished the 7 ft 1 in medium extra-fast model from ice-out. He called it his favorite spinning rod of all time, and the most sensitive one he has used. Outdoor Life’s Pete Robbins picked the earlier IMX Pro 844C as his best overall bass rod. His one con was “Not inexpensive”. He said “if you’re ready for your first premium stick and you want it to cover a lot of bases, this should be your choice.”
Who should pay this much? Someone who fishes one technique a lot, often enough that a lighter tip and more feel on a jig turn into fish. Fish ten days a year and the gap between a $275 GCX and a $685 NRX+ is hard to justify. The two rods have the same ratings. The best fishing rods page compares rods at every price.
Three ways to pay less:
- Buy the GCX. It’s the same 853C on paper as the NRX+, at $410 less.
- Watch for sales. Retailers clear older models, and current ones go on sale too. Google’s shopping panel showed a GLX Mag Bass at $412.50, down from $550, on Nov. 11, 2026.
- Buy used, carefully. Used G. Loomis rods sell at shops and on eBay. The lifetime warranty covers the original owner, so a used rod doesn’t carry it.
G. Loomis or St. Croix?
It depends on your budget. St. Croix covers $115 to $775, and G. Loomis starts where St. Croix’s middle ends, at $265. Above $450 the two ladders sit side by side:
| Price band | G. Loomis | St. Croix |
|---|---|---|
| $250–300 | GCX, E6X Walleye | Victory, Avid Series |
| $450–600 | IMX-PRO Bass, GLX | Legend Elite ($495–585) |
| $600–700 | NRX+ | Legend X2 ($610–645) |
| $750–850 | Conquest | Legend Xtreme ($740–775) |
The warranties differ more than the prices. G. Loomis gives a lifetime for defects plus Xpeditor at 60% off retail. St. Croix gives 15 years on those series and a flat $60 replacement for a rod broken for any reason inside that time. For a rod you expect to break someday, the St. Croix deal is cheaper. For a rod you plan to keep for decades, the G. Loomis lifetime runs longer. Shimano’s own Poison Adrena lists at $439.99 for a medium-heavy casting rod, right beside the IMX-PRO Bass. A $450 budget buys either name from the same company.
The picks
GCX Jig & Worm or Mag Bass. The first G. Loomis to buy, $275–305. The 853C JWR is a 7 ft 1 in medium-heavy bass rod for jigs and worms. Handcrafted in Woodland, with SeaGuide guides.
IMX-PRO Bass Jig & Worm spinning. For finesse fishing on spinning gear, $450. Wired2Fish’s tester used the 852S, a 7 ft 1 in medium extra fast rated 6–12 lb and 1/8–3/8 oz lures. He fished it everywhere from small streams to Lake Erie and says it has enough backbone for 6-pound smallmouth.
GLX Jig & Worm casting. The bottom-contact step, $550–580, with a full Fuji K SiC guide train and AAA cork. G. Loomis tunes it for bottom-contact fishing, so you can read what the jig is crawling over.
NRX+. The top of the bass line most anglers will consider, $655–685, with the American-made Spiral X blank, handcrafted in Woodland. Above it, Conquest at $815–840 is the flagship.
E6X Walleye. The walleye angler’s G. Loomis, $275–315. The 6 ft 6 in medium WUR is rated 6–12 lb and 1/8–3/8 oz, and G. Loomis sells the WUR for “virtually any bait or rig”. For walleye jigs there is the E6X WJR.
How we chose
The ladder comes from G. Loomis’s own store on Shimano North America’s site, read on Nov. 11, 2026. The store lists every current rod with its list price and model chart. Closeout models with a sale price are left out of the ranges. The plant comes from each series page, and the warranty, Xpeditor and claim steps from G. Loomis’s warranty, registration and FAQ pages. The verdicts are quoted from the Wired2Fish and Outdoor Life tests named above. For the reels that go on these rods, see Shimano reels.
Sources (33)
- G. Loomis (Shimano North America), all products and list prices (Nov. 11, 2026)
- G. Loomis, GCX Jig & Worm casting (model chart)
- G. Loomis, IMX-PRO Bass Jig & Worm casting (model chart)
- G. Loomis, IMX-PRO Bass Mag Bass casting
- G. Loomis, IMX-PRO Bass Jig & Worm spinning (model chart)
Show all 33 sourcesShow fewer sources
- G. Loomis, GLX Jig & Worm casting (model chart)
- G. Loomis, GLX Bladed Jig
- G. Loomis, NRX+ Jig & Worm casting (model chart)
- G. Loomis, NRX+ Mag Bass
- G. Loomis, Conquest Mag Bass (model chart)
- G. Loomis, Conquest Spin Jig
- G. Loomis, GCX Mag Bass casting
- G. Loomis, GCX Lite spinning (model chart)
- G. Loomis, E6X Walleye WUR (model chart)
- G. Loomis, E6X Walleye WJR
- G. Loomis, Asquith Freshwater fly rods
- G. Loomis, Who We Are
- G. Loomis Warranty
- G. Loomis Xpeditor
- G. Loomis Product Registration
- G. Loomis FAQ (shipping, cutting a rod, repairs, inspection fee)
- Shimano Warranty (one year, original purchaser)
- Gary Loomis Interview Part 1
- Gary Loomis Interview Part 1
- TackleTour, G.Loomis factory tour (Woodland)
- Wired2Fish, Best Bass Fishing Rods for 2026 (IMX-PRO Bass Jig and Worm spinning, Joe Albanese)
- Outdoor Life (Pete Robbins), The Best Bass Fishing Rods (G. Loomis IMX Pro 844C)
- TackleTour, Regaining His Edge: Bass Rods by Gary Loomis (Edge Rods, a division of North Fork Composites)
- Shimano Rod Express Service (50% off MSRP)
- Shimano, Poison Adrena casting (list prices)
- Fenwick Limited Lifetime Warranty Program ($20 fee, one courtesy replacement at $50)
- St. Croix Rod, Service and Warranty ($60 processing fee)
- St. Croix Rod, all rods and list prices (Nov. 11, 2026)





